- DIY Sump/WD - suggestions
- Chart: Contact Time from Volume and Flow Rate
- DIY Mech. Filtration
- Real Cheap Backgrounds
- anybody use pond pump from lowes in their aquarium sump?
- DIY stand for 125g tank.
- Composite (fake) wood for tank frame?
- Added a feeding tube to the 150 gallon
- DIY Return for w/d sumps?? A little help....
- New 31 Gallon Hex
- Concrete block Aquarium
- my take on a skimmerless pvc overflow
- My DIY wet/dry
- Monster Sized Gravel Vacuum (Python on 'roids)
- Cheap tanks or tanks needing repair
- FX5 canister for 2 tanks
- Hey chompers and other aqua engineering geniuses.
- Building a 1500 Gallon plywood & glass tank
- pond in shed idea
- DIY filter cartidges for a hang over the back filter?
- painting this on my tank
- I got a few questios that need answers
- Aquarium Sump Calculator
- i need some help..
- my 240 gallon project
- sump question
- Couple DIY projects
- DIY tank stand for my 180gal
- Best material to make a hex tank frame with?
- What do i need for filtration on a 220gal?
- Questions on planning my 300gal tank...
- What type of glass to use?
- starting up the diy wetdry
- 1x6's strong enough for a 55g stand?
- Good news! but NOW I need tank making instructions!!!
- need some help with a diy modification
- DIY questions
- More Bio Tower ?s
- Red English phone booth aquarium
- cleaning mold in 1 of fish rooms.....yay!
- tank project
- Over the tank filter, silent or noisy?
- my 1st DIY
- Water based Polycrylic?
- custom made vs buying
- lighting
- 1100 gallon custom tank
- Help! Building a stand...
- 2x4 or 4x4
- wood working question (stand recoat??)
- 12ft stand
- Fish tank trimming
- multiple tank filtering question..
- acrylic or polyurethane pond sealant for plywood tank?
- 6 75Gal tanks
- Started the Framework on my 55gal stand!
- tank divider
- How long to leak test
- What brand pump to buy ?
- Need Ideas for Pond in Basement...helppp
- 29 gallon reseal
- Plywood tank question..
- DIY Plywood Tank Longevity
- NEW Corner bowfornt 3D background
- Stingray Coffee Table
- Q about DIY Fluidized Filter Bed
- Check valve on DIY return
- How do I cut my acrylic top?
- How do I seal overflow holes?
- Pond liner reef safe adhesive
- trim help
- wet dry filter
- 10 gallon sump on a 75 gallon tank
- Which glass thickness should I use?
- Use pipe for a canisterfilter?
- floor boards instead of plywood
- So I got a spare 15 tall.
- my plywood tank frame! (with pics)
- tank stand
- Indoor cat pond
- pond liner marine aplication
- Cement Pond?
- I know.........another sump question
- Plans for DIY filter
- DIY background sealing
- Q? about diy denitrator
- stand design
- simple silicon question--home depot
- my new stand for 8x2x2
- help with sump.
- Gurgling PVC overflow
- Sump design
- Refurbishing an ancient tank.
- Parts needed to hook to your faucet(hardware store way)
- Plywood tank bulkhead with out using a bulkhead?
- question on glass/acrylic/possibly polycarbonate thickness
- help me improve my basic schematic for w/d filter
- DIY Double Barrel 45G Acrylic Wet/Dry
- Equalizing overflow and return flow
- DIY Sump - with pnod liner
- Refugium Questions
- Need ideas for a 240 and 125 stackable stand?
- Ideas for a 240 and 125 stackable stand?
- Pond for oscars
- Rubber plug for 2" bulkhead???
- Weight Predicament
- Building plywood tank. Acrylic or Glass
- Need Advice on Buffing my tank
- 1000 gallon build
- sump questio
- Return line venturi... help needed.
- Satan's Goldfish and the Fish Bowl from Hell!
- Novus Polish : WOW its works!
- Metal Monster 650 is it possible? in progress!
- Back Yard Pond Project
- Started my sump
- Where is the cheapest place to buy weld-on
- 360 gallon build
- sump for a 700 gal pump question
- I think this would go here, not sure
- what paint to use for acrylic tanks
- FBF Filter up date and question
- how to cut plastic egg crate for a tank divider
- Paint?
- DIY drip plate advice...
- Need some ideas.
- Build up of Tortoise box
- completed
- My DIY Tank Stands - Load warning.
- How to make a diy rubbermaid filter???
- How to make a diy rubbermaid filter???
- stand ideas
- Is it wise to reseal an acrylic tank?
- The Most Amazing Sump Ive Ever Seen.
- Anyone have a how to on removing scratches from acrylic?
- is this ok?
- Moonlight
- Sump idea
- Metal Tank Decorations: Advice Please!
- Denitrator built into a sump?
- thin glass
- how to remove paint from acrylic
- DYI: 55g Sump for 125g Tank Questions and Advice Welcome!
- Tempered glass?
- My 500g piece of furniture
- 4 20 gallons. 1 stand. help
- DIY 3D background?
- Central filtration help!!!!
- help with epoxy resin
- diy installed 3d backdrop
- Tank size limits in a apartment building ? Weight concern?
- Krylon Fusion for acrylic tanks
- How to design a FDF?
- how to build an acrylic tank?
- min thinkness wood
- Fish Room Redux - 3600+ Gallon Plywood Tank Build
- DIY lunar lights for under $60
- 55 Gal. Sump
- Flood Proof and 100% Silent HOB Overflow
- DIY: re-plumbing ac50 HOB
- Because all of you
- Underwater Adhesive?????
- my craigslist journey: the repair
- My new Monster 8'x4'x32" stand
- My new Monster 8'x4'x32" stand
- Stand?
- How do I...
- How to remove rubber residue on acrylic?
- Tempered Glass Suggestions????
- wood/metal?
- Saturday Plywood Tank Build - Advice Needed!!!
- Sculpted bottom as Substrate ???
- A New Project coming soon....
- DIY canister filter done
- Prequel to the 2000 gal pond building: "180 gal build"
- Building an Aquarium
- first filter need help
- DIY TANK STAND
- Pics of Tunnel tanks
- Crazy Diy tunnel tanks
- "New" Ehiem Classic Question
- Is pond liners like roof underlayment???
- Is there a silicone that will bond to acrylic?
- Custom DIY 75G stand
- ge1 silicone ?
- Not your typical basement pond
- Builing with acryic help
- DIY canopy extender
- Buffing the " Original " ]V[onster 180gal.
- polycarbonate?
- building my 125gal stand!!! total cost under $130...load warning
- my 180 gallon stand and conopy with a 120 gallon tank 3d background pics look!!!
- price check on plexi
- Fake Driftwood?
- converting reptile cage into fish tank?
- looking to upgrade
- Roof Coating for sealing a plywood tank??
- Acrylic for my DIY 220G
- NEW PROJECT. Concrete. 10x8x6
- Ditching the overflow...
- Standpipe help
- Weld-On #4 or #16?
- boggled indoor pond ideas, help me make this work!
- concrete background sealing
- diy sump confusion
- DIY 7 FOOTER HELP PLEASE
- Wet/Dry Users: What Size Sump and Filter Flow Rate are you using?
- DIY Crayfish trap
- Building 180 gallon stand in class
- Painting tanks?
- Would this kinda "overflow" work
- tired of lifting bucket..
- Reservoirs For aged water/ Threads anyone?
- Trapazoid tank build
- Cementitious sealers
- pics for mcox3 concrete block tank building
- 12 day cycle with DIY wet dry
- 150/180 build with custom sump
- DIY 110 gal 2x55
- Fresh new DIY idea... Need MFK imput!
- Flood prevention
- Rivermuds Test Tank
- getting water to the sump?
- Metal Halide Bulbs
- DIY TaNK LiD cLIP for less than 99 cents!
- formica?
- New tool: Air Bleeder
- 270g tank - cracked front panel
- way to make fake live coral/rocks?
- Cheap Indoor Pond
- DIY Tank Setup, Lighting, and Filtration
- Micro Mini Monster build pt1.1 cabinet
- 20 mil liner, Dr. Joe?? or others that have used it?
- Freshwater Sumpage
- lining a plywood tank question
- First sump...illustration....does this look alright?
- Building a DiY OverFlow
- Hypothetical: Building a 538-gallon 8'x 3' x 3' plywood / glass aquarium.
- DIY Overflow 101 - The Mysteries Explained
- construction material poll
- new DIY driftwood
- HUGE tank Block or Wood?
- Need advice... Acrylic tank on DIY stand.
- I'd like to Point out the Newest Sticky
- cement pond
- Are hockey pucks aquarium safe?
- Giant tank
- sump
- lining large plywood tank
- Super Small refugium???