Is this the correct way to shim a stand?
The tank was off about half an inch, with the shims its better but still about 2-3/16"s off. Will it be ok?
This is the first time I ever shimmed anything lol, we drained the tank down to about 2inches of water, lifted the end that was unlevel and I just tapped the shims in with my foot then used a hammer and a 2x4 to put them in farther.
The tank was off about half an inch, with the shims its better but still about 2-3/16"s off. Will it be ok?
This is the first time I ever shimmed anything lol, we drained the tank down to about 2inches of water, lifted the end that was unlevel and I just tapped the shims in with my foot then used a hammer and a 2x4 to put them in farther.
