Afrikaans Albanian Arabic Belarusian Bulgarian Catalan Chinese Croatian Czech Danish Dutch English Estonian Filipino Finnish French Galician German Greek Hebrew Hindi Hungarian Icelandic Indonesian Irish Italian Japanese Korean Latvian Lithuanian Macedonian Malay Maltese Norwegian Persian Polish Portuguese Romanian Russian Serbian Slovak Slovenian Spanish Swahili Swedish Taiwanese Thai Turkish Ukrainian Vietnamese Welsh Yiddish
Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15
  1. #11
    Bullshark dogofwar's Avatar
    Usergroup
    MFK members
    Join Date
    Jan 2006
    Location
    Maryland
    Last Activity
    Today 6:00 AM
    Posts
    3,463
    I have a 50+ tank fishroom in my basement and control humidity / water damage by covering tanks (and sumps) and with small circulating fans blowing on ducts and other places where condensation might occur.

    Matt





  2. #12
    Spotted Gar creativityasaweapon's Avatar
    Usergroup
    MFK members
    Join Date
    Dec 2011
    Location
    Wausau, WI
    Last Activity
    Today 5:26 PM
    Posts
    129
    We've been running our 400 without lids for about a month and haven't seen any problems yet. Then again, we're in the dead of winter here but the tank is in the basement where it's about 56F and the tank is around 74-76. I have yet to see any condensation on the walls or pipes. The guy we bought it from didn't run lids either and kept discus in it at around 84F year round and didn't run into any problems. He also had a 350, 140, and four 75s and didn't have any mold problems. Humidity? definitely, but it didn't cause problems. Once again, we are talking northern WI here and it stays dry for most of the year, but we have some wicked seasons here both ways.



  3. #13
    Dorado Drstrangelove's Avatar
    Usergroup
    MFK members
    Join Date
    Oct 2012
    Location
    San Francisco
    Last Activity
    Today 3:59 PM
    Posts
    513
    http://www.ecometrex.com/moisture.htm

    I would read this especially the links as they have a nice map of the US Canada for reference.

    The main thing is that the basement was probably not built with the 600 gallon tank in mind. It might be okay, but it's not a safe bet by any means. If you have exposed wood, paint and concrete or brick, some of which (wood especially) or paint may not have been treated with expectations of high moisture, then the issue is real.

    Given that, you can remove the added moisture and possibly add sealants to the wood and paint that are anti-fungal. The break even point for fungal growth is 70% relative humidity (which may be easier to hit in the winter than it seems), and far lower for wood.

    On the other hand, keeping the RH under 60% could be something you don't have to worry about. I'd install the tank and just keep a watch on the humidity levels at various spots in the basement. And be prepared to get a dehumidifier.



  4. #14
    Redtailed Catfish aldiaz33's Avatar
    Usergroup
    MFK members
    Real Name
    Alex
    Join Date
    Jun 2007
    Location
    Bay Area
    Last Activity
    Today 9:04 AM
    Posts
    1,630
    My 770G with 150G sump is in a small 18x10 unheated pool room. Humidity levels in the Winter are on average around 70% (but at times as high as 80%). When it's really cold (~32F) I get condensation forming on my windows and on my skylights. This would definitely be unacceptable if it was in my house, but in the little pool room, I'm not too worried about it.

    I have lids, although there are gaps (they are definitely not air tight). I also have lids on my sump. I would buy a cheap hygrometer (I have this one and am happy with it: http://www.amazon.com/Acu-Rite-Indoo...=humidy+sensor).

    If your humidity climbs much above 60%, I would definitely get a dehumidifier.
    In all affairs it's a healthy thing now and then to hang a question mark on the things you have long taken for granted.
    —Bertrand Russell

    770 Gallon Build Thread: http://www.monsterfishkeepers.com/fo...etup&highlight=



  5. #15
    Datnoid Rayne's Avatar
    Usergroup
    MFK members
    Join Date
    Sep 2010
    Location
    BC, Canada
    Last Activity
    Today 6:11 PM
    Posts
    327
    Thanks everyone. I'm definitely going to be adding an exhaust fan in the fish room as well as outside of it and both are going to be controlled by a humidistat.
    75G SA Planted Community Tank
    Red Head Geo's
    Oto's
    Plecos! L075, L128, 2x L200



Page 2 of 2 FirstFirst 12

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •