hey I'll going to build a glass aquarium with plywood bottom with these dimensions 290x210x65 cm. so can some of you guys explain how to apply silicon on the plywood and If i should silicone the glass against bottten and should I'll treat the edges of the plywood to?? and what should i use to seal the plywood with?, I will use three pieces of plywood with dimensions of 240x120 cm.and woulde 12mm glass and 21mm plywood be enough?so all the plywood pieces will have these dimenisions 87x210cm
if you have any thoughts, then ask!!
Thanks
if you have any thoughts, then ask!!
Thanks