Eheim Reeflux 800 Question

4D3

Gambusia
MFK Member
Jan 21, 2013
911
14
18
Australia
Hi,

I have an Eheim 2262, currently i have a 40w Swimming pool UV filter inline with the canister pump outlet, i.e. the clean water comes out of the canister and through the UV then back into the tank return line.

I was thinking to buy the Reeflux 800, which is suitable for tanks up to 800l (apparently) but noticed it only had a flow rate of 1200l/h.

I was wondering is it worth the money to get the Eheim UV, or should i stick with my more powerful 40w UV?

The sterilizer I currently have is:

http://www.ebay.com.au/itm/Aquarium...688576?pt=AU_Pet_Supplies&hash=item2a3c8fe0c0

Thanks in advance.

4D3
 

KAWAMIKIE

Candiru
MFK Member
Feb 17, 2010
596
5
48
New Jersey
The uv you have is fine. If the bulb is old you may benefit from a new bulb.
I would tee the return and valve it to slow the water down going through the uv light to get more contact time. Or add a small pump like a 100-200 gph to run the uv separate.
 

4D3

Gambusia
MFK Member
Jan 21, 2013
911
14
18
Australia
The uv you have is fine. If the bulb is old you may benefit from a new bulb.
I would tee the return and valve it to slow the water down going through the uv light to get more contact time. Or add a small pump like a 100-200 gph to run the uv separate.
So e even though my current uv is rated up to 4700l/h, you think I should still slow the flow rate through the uv?
 
zoomed.com
hikariusa.com
aqaimports.com
Store