The questions is about pressure/flow. In particular flow through a moving bed filter; container/bottle. Specifically the placement for the holes of the water intake and exit parts of the filter. I was wondering which scenario would be most optimal at moving the most GPH through said container/bottle:
A. Drilling many holes at the bottom and few at the top
B. Drilling few holes at the bottom and many at the top
C. Drilling same amount of holes in bottom and top
D. It does not matter, the flow will be weak anyways
This filter will be powered by air pump, with air line at bottom of container/bottle.
When answering please state WHY you believe this to be true.
A. Drilling many holes at the bottom and few at the top
B. Drilling few holes at the bottom and many at the top
C. Drilling same amount of holes in bottom and top
D. It does not matter, the flow will be weak anyways
This filter will be powered by air pump, with air line at bottom of container/bottle.
When answering please state WHY you believe this to be true.