So guys for past 6 months ive been building a 300 gallon plywood tank, I used fiber glass and rubberizeit as a sealant. I used about 2 gallons and about 9 coats. I seem pretty tight so I tested it yesterday I filled it 1/3 and I have a leak, ive narrowed down to the front left bottom corner area. I was in aww to see this thing leak after all my work. I was putting my coats on pretty heavy and was getting every detail the whole way through. I only have maybe 4-5 ounces of rubber left. If I miss it im open to ideas on a patch, I was thinking krylon fusion. I really dont want to spend another $70 for another gallon of rubber.
Sorry for the long post, ive been stockpiling my pics hoping to start a post when its finished. Thanks
Sent from my SGH-T999 using MonsterAquariaNetwork App
Sorry for the long post, ive been stockpiling my pics hoping to start a post when its finished. Thanks
Sent from my SGH-T999 using MonsterAquariaNetwork App