just started working on three ply/fibreglass 800gallon (3000 litres) 2400x600x600mm glass fronted (15mm thick)
Here just Grinding surface off Form Ply for better resin adhesion
have predrilled, countersunk and screwed each edge - all butt joints
Routered all edges so glass matt goes round corners better
Other two tanks we are starting to apply resin and glass
more updates as we progress
the tanks will be used for billabong setups with turtles, barramundi, Saratoga, sooty grunter, tarpon, turtles and other local billabong species to Darwin NT Australia
water will be pumped into these tanks we r building and overflow directed towards large outdoor storage and filtering system
turn over of water will be very high
Here just Grinding surface off Form Ply for better resin adhesion have predrilled, countersunk and screwed each edge - all butt joints
Routered all edges so glass matt goes round corners better
Other two tanks we are starting to apply resin and glassmore updates as we progress
the tanks will be used for billabong setups with turtles, barramundi, Saratoga, sooty grunter, tarpon, turtles and other local billabong species to Darwin NT Australia
water will be pumped into these tanks we r building and overflow directed towards large outdoor storage and filtering system
turn over of water will be very high
:thumbup: look forward to seeing those setup , your stock plan sounds great 
