Needed another tank for a grow out but I am to tired to maintenance more tanks. Did a little google searching and came up with this based on what I had in my garage.
Items used-
1/2" pvc 12' is about 2.00 (I used my scraps)
Zip ties- 2.50
Suction Cups 6pk 1.95 ea (2 pk)
Plastic mesh- forgot the price but ball park is about 10.00
Aquarium safe paint- also forgot the price lol, abour 5.00
Total out of pocket for the project was 6.50 (zip ties and suction cups)
6x 11/32 holes for the section cups to fit.
I measured the mesh wrong so its looks crappy. Not as tight as I wanted but it's a pain in the rear to have to remove the suction cups from the wall when the top of my tank stands at 5'. When I remove it, I will cut it down to size. This is just so people can get an idea of my DIY Divider
temp side is a grow out Paroon Shark.
Main side is Aimara, Atabapo I, flatgail and armatus
Thanks for looking
Items used-
1/2" pvc 12' is about 2.00 (I used my scraps)
Zip ties- 2.50
Suction Cups 6pk 1.95 ea (2 pk)
Plastic mesh- forgot the price but ball park is about 10.00
Aquarium safe paint- also forgot the price lol, abour 5.00
Total out of pocket for the project was 6.50 (zip ties and suction cups)
6x 11/32 holes for the section cups to fit.
I measured the mesh wrong so its looks crappy. Not as tight as I wanted but it's a pain in the rear to have to remove the suction cups from the wall when the top of my tank stands at 5'. When I remove it, I will cut it down to size. This is just so people can get an idea of my DIY Divider
temp side is a grow out Paroon Shark.
Main side is Aimara, Atabapo I, flatgail and armatus
Thanks for looking