Dollies, lots of manpower (I would recommend a minimum of 8 people) and planning are what you need to get it done. You "might" be able to do it with less people, but why risk it?
Moving day for my 10'x3'x4' (1.25" thick) was super stressful. The tanks weighs around 1,200 lbs and I figured the more hands on the tank, the better so I had 12 people. I hired a moving company to move it. They provided 6 guys and the truck and they charged me ~$900 to move it roughly 100 miles. (I showed up with 6 of my friends for the total of 12).
Forearm forklift moving straps were helpful, but doing a "dry run" rehearsal was definitely key.
Personally, I think a 4' tall tank that is made of only 1" thick acrylic is underbuilt. My tank is 4' tall and it's made of 1.25" thick acrylic and it bows much more than I'd like. I think 4' height should be built with 1.5" acrylic. I'm not saying it will burst, but I bet there is going to be a lot of deflection on that tank.
Moving day for my 10'x3'x4' (1.25" thick) was super stressful. The tanks weighs around 1,200 lbs and I figured the more hands on the tank, the better so I had 12 people. I hired a moving company to move it. They provided 6 guys and the truck and they charged me ~$900 to move it roughly 100 miles. (I showed up with 6 of my friends for the total of 12).
Forearm forklift moving straps were helpful, but doing a "dry run" rehearsal was definitely key.
Personally, I think a 4' tall tank that is made of only 1" thick acrylic is underbuilt. My tank is 4' tall and it's made of 1.25" thick acrylic and it bows much more than I'd like. I think 4' height should be built with 1.5" acrylic. I'm not saying it will burst, but I bet there is going to be a lot of deflection on that tank.



