All I can think of is to buy some Acrylic or glass from home depot and manually cut something out. Any other ideas or sources?
Need lids for a 125 built in 2001
- Thread starter Irecruitfish
- Start date
Same as my tank. Name you location and I"m sure someone can recommend a store that you can order the proper lid from.
The only 2 125g designs I have seen have 1 separator in the middle, or 2 which would need a 3 piece lid.
I looked this up really quick but this should be what you need for a 2 piece lid.
https://www.drsfostersmith.com/product/prod_display.cfm?pcatid=3781
I looked this up really quick but this should be what you need for a 2 piece lid.
https://www.drsfostersmith.com/product/prod_display.cfm?pcatid=3781
What's the length and width of each section?
I just tried the link it's fine for me.
You can get the polycarbonate clear at lowes for about $20 for an 8' x 2' sheet. Doesn't look great but works great. It' super easy to cut too.
I just tried the link it's fine for me.
You can get the polycarbonate clear at lowes for about $20 for an 8' x 2' sheet. Doesn't look great but works great. It' super easy to cut too.
Don't know why it linked a different site. If you highlight and copy the link instead of clicking it will be the right site.
https://www.drsfostersmith.com/product/prod_display.cfm?pcatid=3781
