FX6 on a 90

[celebrist]

Overkill?
Should I still run a hob?

Breeding pair of jacks
School of dither tetras, bristlenoses?

 

[Mitchell The Monster]

Nah fx6 would be fine IMO. Thinking about adding one in addition to my FX4 onto my 125 in fact

 

[fishhead0103666]

I have an fx6 on my 75 as the sole filtration (for now) and it is just right. Want me to post a video so you can see just how much flow it’ll be?

 

[Jexnell]

Overkill?
Should I still run a hob?

Breeding pair of jacks
School of dither tetras, bristlenoses?

If it was me I would run an AC110 as well. That way if either goes out, the other can keep up the tank till the faulty one is repaired.

 

[celebrist]

Thanks for the input, I will run the fx and a 110 but will diffuse the current a bit

 

[Jexnell]

I have two FX4s on my 125

FX4s have dual outlets, one I aim down the back wall of the tank across the heater. The other is aimed at the surface to cause agitation. I believe FX6 are the same with dual outlets.

 

[RD.]

I agree with Jexnell, redundancy is always a good idea. Two filters, two heaters, two wives, etc.

 

[TexasMFK31]

I agree with Jexnell, redundancy is always a good idea. Two filters, two heaters, two wives, etc.

Two wives is really pricey should **** hit the fan..... Haha.

 

[Matteus]

Thanks for the input, I will run the fx and a 110 but will diffuse the current a bit

Fluval has a spray bar that seems to be a new product. Just in time for the new 07 series canisters. I’m not sure but it looks as if it would be transferable to the fx series as well.

TexasMFK31 - you took the words right out of my mouth.