Im putting together a 60"lx24"wx30"h tank for my loaches atm and have reached a bit of a quandary.
I have the bottom and short sides cut and ready, but the issue is for the big panels, the 60x30s.
In my possession i have:
-1x 60x30 1/2" thick tempered glass piece
-2x 72x30 5/8" annealed glass pieces
I had initially thought to cut both of the 5/8" pieces down to 60", but want to know if I'm good at 30" height to use the 1/2" tempered. I plan to use a 10-12" slab of 5/8" to brace the middle of the tank.
I would love to save the one 72x30 which is in good condition for my next project, and I'll likely have no other use for the 30x60 in the future.
I have the bottom and short sides cut and ready, but the issue is for the big panels, the 60x30s.
In my possession i have:
-1x 60x30 1/2" thick tempered glass piece
-2x 72x30 5/8" annealed glass pieces
I had initially thought to cut both of the 5/8" pieces down to 60", but want to know if I'm good at 30" height to use the 1/2" tempered. I plan to use a 10-12" slab of 5/8" to brace the middle of the tank.
I would love to save the one 72x30 which is in good condition for my next project, and I'll likely have no other use for the 30x60 in the future.