100% cleanning

[Rockydog]

Actually if the driftwood is buoyant it will probably pull the ugf plate up. If you can find a piece of slate just drill a hole in the center and use a stainless screw to attach it to the driftwood, that will keep it down and can be covered up with gravel.

 

[Armored_delhezi]

OK... I'll do that... Thanks for the tip...

 

[ihavegills]

If that don't work just prop some rock on the drift wood to hold down for a couple of weeks until it becomes water logged. I had to do this once, and was able to prop the rock on it, in a fashion that actually looked good.

 

[Armored_delhezi]

Hmm... That gives me another idea... But I still have to find some good rock for my drift wood... Thanks