10foot stand

  • We are currently upgrading MFK. thanks! -neo

nes999

Feeder Fish
MFK Member
Mar 25, 2009
1,803
2
0
IL
if not marked its a 12inch space. the tank is 10 by 5 by 32inch tall would this stand work? i need the 64inch gap to get my sump in.


stand.jpg
 
I dont think having the brace off center will be an issue. I do agree with sandwiching 2x4s together instead of using 4x4s. Also, why not keep the center brace in the center and just have it removable? I would build tank and stand, install sump, do all the plumbing and then add the center brace. The only drawback is the sump is in there unless you lower the water enough to remove the brace.
 
BadOleRoss;4269122; said:
I dont think having the brace off center will be an issue. I do agree with sandwiching 2x4s together instead of using 4x4s. Also, why not keep the center brace in the center and just have it removable? I would build tank and stand, install sump, do all the plumbing and then add the center brace. The only drawback is the sump is in there unless you lower the water enough to remove the brace.
if i remove it when my tank is full id imagine id get some good saging until i put the brace back. i dont have access to the sides i wish i did.
 
Like said earlier why not just put in the sump then install a center brace if needed. How many times do you need to remove the sump when the tank is full? I have had to do it 0 times on my 240 and believe that is pretty normal.
 
MonsterFishKeepers.com