I recently purchased a 150 gallon acrylic tank with a 5.5" x 6.5" overflow located on the side.It is drilled with two holes on the bottom for a 1" drain and 3/4" return.
I'm very new to all this stuff this is my first large tank.I'm only going to keep a single wolf fish and I've read they are messy eaters and need ample bio filtration.
I thought about running a eheim 2262 connected to the overflow kinda like xander has his.I have never run a sump before so I'm kinda lost when it comes to those.If I did run a sump I would like to make a rubbermaid trickle filter but I'm not sure of the 1" inch drain is enough to support the needed flow for this size tank?Any other ideas or suggestions?
Sent from my MB865 using MonsterAquariaNetwork App
I'm very new to all this stuff this is my first large tank.I'm only going to keep a single wolf fish and I've read they are messy eaters and need ample bio filtration.
I thought about running a eheim 2262 connected to the overflow kinda like xander has his.I have never run a sump before so I'm kinda lost when it comes to those.If I did run a sump I would like to make a rubbermaid trickle filter but I'm not sure of the 1" inch drain is enough to support the needed flow for this size tank?Any other ideas or suggestions?
Sent from my MB865 using MonsterAquariaNetwork App
