150 gallon setup-PU only-Urbana, OH (43078)

  • We are currently upgrading MFK. thanks! -neo
Status
Not open for further replies.

andyjs

Jack Dempsey
MFK Member
Aug 13, 2008
2,765
4
36
37
Ohio
The setup includes:
150 gallon glass tank
-72X18X28
-center overflow
-chip along one of the back edges, but doesn't affect seam (been set up for at least a few years with no problem)
-some minor scratches (one pretty big one on inside of front)

pretty nice wooden stand (tall, tank on stand is almost 6' tall)
-5 sets of doors, 3 on front, 1 on each end
-shelves for storage of supplies
-pond liner drip tray inside the bottom

wet/dry sump
-acrylic sump about the size of a 20L w/ wet/dry chamber on top
-Iwaki return pump (I'll have to check out the exact specs on the pump)
-I also bought the setup with a protein skimmer, but it needs a new pump, and one piece is broken (should be an easy fix)

UV sterilizer (will also have to check out the specs)
-plumbed in with a bypass that includes a shutoff valve in case you want to run all of the return through the UV

Does not include tops or lights, but there is a basic wooden frame for a canopy that the previous owner was starting to build as well as some background/cave type things the previous owner made from PVC rain gutters covered in black silicone and lava rock that I will throw in if wanted.

I'm asking $450 for all, but I'll take offers and possibly consider parting it out, or taking partial trades for a 4' 75-120 gallon and/or larger canister filters plus some cash
 
Here's one picture from when I was setting it up to get an idea of what the stand looks like
IMG_3515.jpg

It's a nice stand, but I forgot to mention that a previous owner must have set the filtration up wrong at some point or something because there is some water damage to one of the doors on the sump end and one hinge needs to be replaced, but it is otherwise a pretty decent furniture quality stand

Here's the only really noticeable scratch on it. It's toward the right side of the front. Probably about 10" long
IMG_4269.jpg


and the chip along the back edge-basically just the very edge of the back glass is rounded off a bit. Doesn't seem to affect the seal at all.
IMG_4268.jpg
 
ck_jackson87;4903035; said:
What would you want for the sump?
I would like $250 or so (I'm assuming you want the pump included?), but what would you offer for it?
 
Bump

Any offers? I should have enough of the fish gone later this week to tear the setup down. I'd like to have the stuff gone and could use a little extra cash for some bills...
 
Bump
 
Bump
 
new2natives;4915364; said:
I have a freind who may be interested. Price of tank only? And price with just stand?
I'd like about $125 for the tank and $75 for the stand
 
Status
Not open for further replies.
MonsterFishKeepers.com