$350 for the complete 200g setup and $300 for the 150g setup or $600 for both complete setups. (I'd love to sell both to one person for simplicity sake, hence the big discount)
4'x2'x2.5' 150g Glass
8'x2'x20" 200g Acrylic
150 has -
2 x ViaAqua Pumps - 480gph and 700gph or so.
27g Plastic tote Sump with Media (scrubbies)
2 x Eheim Jager 300w Heaters (Expensive and I just got them, so they are new)
2 x Digital Temp Gauges
Hood with brace since the plastic is broke on the tank brace itself. Hood also has blue led night lights and 4 spots for T8 bulbs. Very nice hood.
All hoses for plumbing, so it's ready to go.
2 x Powerheads mounted to the Heater PVC tubes (keeps the ray safer with heaters in tubes no risk of burn) to keep the tank well circulated and evenly heated as well.
Plus the stand too... 2x6 / plywood top painted black. Nothing to fancy but solid...
1/2" glass super thick
*** One of the overflow tubes is siliconed in place too, but it doesn't hurt anything. Just makes it a little more of a pain to move. It was a tiny drip and the tank was setup already so I had to silicone it. ***
It's not a perfect show tank but it is very nice.
200g has-
1 Quiet One 3000 pump 700gph and 1 ViaAqua 1800 480gph or so
27g plastic tote sump with media - scrubbies
glass lids one has chipped corner but still covers the openings - thick and heavy duty lids
stand - black painted wood 2x4 with plywood top and foam
300w Rena Heater, 400w Theo heater, 75w Rena Heater
Plumbing and hoses for pumps
4' shop light with bulbs
Thermometer
Tank is acrylic and has scratches as well as two small repairs (one I did when I got it, other was done already) but Ive had it holding water 3 years now including moving it once. not a show tank but if it were the price would be 3x as much. It's not bad to look at once full and holds water fine.
4'x2'x2.5' 150g Glass
8'x2'x20" 200g Acrylic
150 has -
2 x ViaAqua Pumps - 480gph and 700gph or so.
27g Plastic tote Sump with Media (scrubbies)
2 x Eheim Jager 300w Heaters (Expensive and I just got them, so they are new)
2 x Digital Temp Gauges
Hood with brace since the plastic is broke on the tank brace itself. Hood also has blue led night lights and 4 spots for T8 bulbs. Very nice hood.
All hoses for plumbing, so it's ready to go.
2 x Powerheads mounted to the Heater PVC tubes (keeps the ray safer with heaters in tubes no risk of burn) to keep the tank well circulated and evenly heated as well.
Plus the stand too... 2x6 / plywood top painted black. Nothing to fancy but solid...
1/2" glass super thick
*** One of the overflow tubes is siliconed in place too, but it doesn't hurt anything. Just makes it a little more of a pain to move. It was a tiny drip and the tank was setup already so I had to silicone it. ***
It's not a perfect show tank but it is very nice.
200g has-
1 Quiet One 3000 pump 700gph and 1 ViaAqua 1800 480gph or so
27g plastic tote sump with media - scrubbies
glass lids one has chipped corner but still covers the openings - thick and heavy duty lids
stand - black painted wood 2x4 with plywood top and foam
300w Rena Heater, 400w Theo heater, 75w Rena Heater
Plumbing and hoses for pumps
4' shop light with bulbs
Thermometer
Tank is acrylic and has scratches as well as two small repairs (one I did when I got it, other was done already) but Ive had it holding water 3 years now including moving it once. not a show tank but if it were the price would be 3x as much. It's not bad to look at once full and holds water fine.
