155 bowfront lid?
- Thread starter florencejr11
- Start date
If its one of the old oceanic 6x2x2 bowfronts then youll most likely need to custom cut the top pieces. These tanks or components are simply not in production anymore. I would opt for polycarbonate instead of glass anyways, which has become more readily available in recent years.
I got a deal on a corner tank a few years ago that didn’t have a lid, so I just made lids from light diffusers. You can use the egg crate type or if you’re worried about evaporation there’s also the solid transparent type. Either way they’re easy to cut to fit and can be found at Home Depot or Lowe’s
You can trace a template of the top and get either cut glass or poly c. Since it would be custom you could have holes cut for filtration and air.
See if you can get one from Aqueon. They used to make the 155g bow and 175g bow. I believe the only difference between them was the height of the tank.
the glass tops should be the same? email Aqueon and see what they say
the glass tops should be the same? email Aqueon and see what they say
www.customaquariums.com
or... make a canopy (or have one made at a local cabinetry shop), stuff an LED strip in it and call it good.
or... make a canopy (or have one made at a local cabinetry shop), stuff an LED strip in it and call it good.