300g plumbing help please

[CHAMPLINE]

I got a 300g acylic tank and it does not have internal overflows and i dont want to use external overflow do to the tank having euro bracing i have a eshopps wet/dry just would like to know how i should plumb it up any input would help and i am willing to drill thanks again in advance

 

[VIP FISH]

well you can buy a kit OVERFLOW BOX HANG IN THE BACK

 

[CHAMPLINE]

Tank has a 3 inch brace around the top and i dont want to cut the top to fit the overflow box

 

[Pharaoh]

Without using HOB (hang on back) overflow, you would need to drill the tank, install a bulkhead and plumb it through the tank.

 

[CHAMPLINE]

what size bulkheads?

 

[syndicate]

depends on your return pump

 

[CHAMPLINE]

i have a quite1 4000 and a mag12 thinking of using both

 

[syndicate]

http://www.monsterfishkeepers.com/forums/showthread.php?t=205645

should give u an idea of the size off overflows youd need

 

[Pharaoh]

what size bulkheads?

Size of the bulkheads would depend on the flow that you want in the system. IMO, bare minimum is probably 3-5 times turnover, some like to do more.

This link will tell you the different size PVC needed for the various flow rates.
http://www.monsterfishkeepers.com/forums/showthread.php?t=205645

 

[CHAMPLINE]

cant i just drill two holes in the back and plumb it to the sump that way?