48x18x96x18 tank
- Thread starter bigbaddad
- Start date
its a 4 dimensional tank? Are you going to keep Dr. Who in it?
Whats keeping you from finishing it?
Whats keeping you from finishing it?
Whoa! a four dimensional tank!!
Seriously tho, g'luck with your build.
edit: dang I thought I was first...
Seriously tho, g'luck with your build.
edit: dang I thought I was first...
lost all of the pics of the build but the sides have two 45 degree angles that make the back long and the front 4 feet the box is 18 inches wide and 18 inches deep with a built in frame for the window for the glass to sit flat against.
the stand is a gutted out dresser with a reinforced inside (this i didn't build)
so i built the tank to fit it .
the stand is a gutted out dresser with a reinforced inside (this i didn't build)
so i built the tank to fit it .
does anyone know if a polyurethane sealer is ok ? i was going to use the tank for salt water and use a 2 part epoxy over the poly but i ended up buying a tank and filter and then re-selling them (long story).
anyway the tank was built and had some leaks due to the complexity of the design and i had to rebuild some of it so no i don't really know if i want to sand the whole thing down and use a marine paint or more poly i had to sand down some areas where i had to do some rebuilding.
anyway the tank was built and had some leaks due to the complexity of the design and i had to rebuild some of it so no i don't really know if i want to sand the whole thing down and use a marine paint or more poly i had to sand down some areas where i had to do some rebuilding.
