http://lubbock.craigslist.org/for/2199543804.html
Would this be good for some White's Dumpy tree frogs?
Would this be good for some White's Dumpy tree frogs?
4ft by 2ft by 5 ft (299.2 "Gallons")?
- Thread starter Liz Sagara
- Start date
Would it hold moisture though? That's what I'm worried about. Could I cover most of the back with something to hold in the moisture?
I could put like a background or somthing on that side to keep the moisture in and put a towel behind it against the wall to stop the wall from getting wet or would putting a background there work?
you could maybe try covering it with plexiglass or something
If the holes in the enclosure are big, you might wanna put the plexiglass or something on the inside instead.
If the holes in the enclosure are big, you might wanna put the plexiglass or something on the inside instead.
Yeah I can cut some plastic sheeting. You can get that at Home Depot right? An then I can use Silicone to hold it in place?
I like it because it's huge... and really cheap... like 50 dollars and I can't even buy a 18x18x24 for 50 dollars. Craigslist is beast.
Home depot or Lowes is good for the plastic
I don't know about silicone, its meant for glass only
People had problems with seams falling apart when working with acrylic.
The adhesives would depend on the material the cage is made of.
I don't know about silicone, its meant for glass only
People had problems with seams falling apart when working with acrylic.
The adhesives would depend on the material the cage is made of.
Ah. Well I can try it and see. If not I'll just have to make sure it's tight enough not to fall down on anything.