I just finished up my stand for a 90 gal. planted tank I'm setting up. I created an album you can check out if you like, showing various stages of the build. It's the basic framework skinned with 1/4" oak veneer plywood.
I used a Kreg Jr. jig to drill the pocket holes for all the screws holding together the frame and trim. It's the first experience I had using them and I'm impressed with how they work.
Now it's on to building the canopy, followed by a stand and canopy for my 135.

I used a Kreg Jr. jig to drill the pocket holes for all the screws holding together the frame and trim. It's the first experience I had using them and I'm impressed with how they work.
Now it's on to building the canopy, followed by a stand and canopy for my 135.








