I have abs siliconed to the sides and back of my tank. One side has come unglued while the tank is running. It is not a tank I can drain to resilcone with out a ton of hassle (full of very large rays). Is there any other ways of gluing this back on? Tank is glass by the way.
Abs to glass.....while its wet.
- Thread starter rudy
- Start date
not really, the only thing that would do the job you want is some hardcore epoxy but it will poison your fish...
If this is a large enough tank, you can spot glue it with waterproof 2 part epoxy putty (used for pool repair). Do some W/C's if your worried pollution. I've not had a problem even with sensitive critters.
You can use the putty that they use in marin tanks for sticking down coral frags. It is a two part putty and you just squeeze it in you hands until it is really mixed well and you can just stick in to what ever you want. http://www.thatpetplace.com/pet/group/807/product.web
make a small hole in the abs put some fishing line through it attached to a suction cup , stick on glass and jobs done .