AC 110's?

[Bre]

How do you guys clean the impellers on these?

 

[ewurm]

I just flush it out with water. I haven't figured out how to remove it, but haven't had to.

 

[dmopar74]

the motor twists off the filter, then you can remove the impeller from the motor. just make shure the filter has no water in it before you remove the motor or youll have a big mess to clean up.

 

[Jgray152]

THere is also a black plastic plate right above the impeller that can be pulled out. It will snap out (no not break, lol).

 

[crisper]

I just remove the motor from the filter remove the impellar and rinse in hot water.Pretty easy stuff.

 

[chesterthehero]

^^ yep all that.. a bottlebrush is a great way to cleanout the motor itself

 

[ewurm]

the motor twists off the filter, then you can remove the impeller from the motor. just make shure the filter has no water in it before you remove the motor or youll have a big mess to clean up.

Ah, I tried to pull it out of the filter without removing the motor.

 

[Bre]

Ok, thanks guys I'll give it a try.

 

[OscarRobinson]

Be very careful when twisting the motor back on to the filter. Make sure the tabs on the motor are seated wright before twisting back on.

 

[killarbb]

i like to use a dab of vasoline on the rubber oring when reassembling. allows it to seal and stay wet.