acrylic divider for 125g dimensins

[Charney]

Anyone know the best dimensions to cut an acrylic divider for a 125 tank? I want to be able to manipulate it without too much difficulty and apply the suction cup clips but minimize the gap between the divider and the tank walls.
thanks

 

[Bertie07]

I wanted to know this to

 

[deeda]

Easiest way is to measure the particular tank with a tape measure as there can be slight differences between brands and glass thickness as well as the age of the tank.

You can also measure the outside dimensions of the tank and subtract the glass thickness.

 

[Backfromthedead]

Probably be something like 17.25"x19". Cut it like that and if its too wide just trim it.

 

[kno4te]

These are mine 21x16 3/4 inch. About be used right now.

 

[deeda]

Ron, do you have a link to the bracket for the divider?

 

[kno4te]

Ron, do you have a link to the bracket for the divider?

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/172317046792