C csa dad Candiru MFK Member Dec 21, 2009 258 0 46 evington ,va Feb 9, 2010 #1 can you attach acrylic or plexglass to a glass tank to make a wet/dry an sump.
Pharaoh Administrator Staff member Administrator MFK Member Feb 18, 2008 17,567 178 1,097 Indianapolis Feb 9, 2010 #2 I siliconed acrylic sheets inside of my 75 gallon to make a sump out of it. It worked well.
C csa dad Candiru MFK Member Dec 21, 2009 258 0 46 evington ,va Feb 10, 2010 #4 ok thats what i wanted to do with this 40 gallon tank i got but glass cages said you couldnt silicone acrylic to glass
ok thats what i wanted to do with this 40 gallon tank i got but glass cages said you couldnt silicone acrylic to glass
Pharaoh Administrator Staff member Administrator MFK Member Feb 18, 2008 17,567 178 1,097 Indianapolis Feb 10, 2010 #5 Silicone doesn't stick well enough to acrylic to support water weight, but it is fine if there is water on both sides, such as in a sump.
Silicone doesn't stick well enough to acrylic to support water weight, but it is fine if there is water on both sides, such as in a sump.
C csa dad Candiru MFK Member Dec 21, 2009 258 0 46 evington ,va Feb 11, 2010 #6 so can i use it to make my overflows an if so what diamter plexi should i use in my 240 build.
Pharaoh Administrator Staff member Administrator MFK Member Feb 18, 2008 17,567 178 1,097 Indianapolis Feb 11, 2010 #7 You can use acrylic to make overflows, but you will need to bond the acrylic with cement, not silicone.
You can use acrylic to make overflows, but you will need to bond the acrylic with cement, not silicone.
C csa dad Candiru MFK Member Dec 21, 2009 258 0 46 evington ,va Feb 16, 2010 #8 what type of cement. an sorry it took so ong to answer the snow took out my wireless router the other day an i have been without any inter net
what type of cement. an sorry it took so ong to answer the snow took out my wireless router the other day an i have been without any inter net
Pharaoh Administrator Staff member Administrator MFK Member Feb 18, 2008 17,567 178 1,097 Indianapolis Feb 16, 2010 #9 Look for Weld On acrylic epoxy.