Advice on Plywood tank

[lung lover]

So this summer I am planning on building a 5'x3'x2' LxWxH plywood aquarium. This tank will go on a stand that will be 18" tall. Any advice on how thick the ply wood should be, sealant, glass thickness, any and all suggestions/advice would be highly appreciated.

 

[dr exum]

I’ve got not much helpful info other than if you put plywood tank in the search bar, I’m sure you will find copious threads

And welcome!

 

[Backfromthedead]

3/4" sanded plywood should work fine. Usually comes in 4x8 sheets of birch or maple. Either of those will work.

 

[Timmy]

There is many threads and youtube videos on how to produce a plywood tank. Ive never done it nor do i have the knowledge how, lol