Another Monster Tank!
- Thread starter prophets
- Start date
Hmmmm...I think I'll put in my Silver aro in that "monster" tank. 
Yeah..bored..and had extra pieces of acrylic...12x12x12...probably going to use that to hold my superworm babies.
Anyway...most of the fishes are now in my 240...with some new pickups.
New pickups are:
2-Clown Knives 4~"
3-Clown loaches 3"
1-New Guinea Datnoid 4.5"
Yeah..bored..and had extra pieces of acrylic...12x12x12...probably going to use that to hold my superworm babies.
Anyway...most of the fishes are now in my 240...with some new pickups.
New pickups are:
2-Clown Knives 4~"
3-Clown loaches 3"
1-New Guinea Datnoid 4.5"
Thanks
Yeah..its a 240G Long 96x24x24 from Tenecor...when it arrived..I thought to myself..oh shlt...how am I going to get it in to my rec room.
Still working on it. Just cracked my UV glass tube that goes into my chiller. I had to move the chiller out from under the cabinet to make room for my OC 319 and DIY FBF.
Now my dilemma is..I need to move the chiller to the left of the 240..in between the 125 and 240 which gives more than enuff clearance for the ventilation requirement for the chiller. Besides my window is right there, if I need to I can run a air vent duct to exhaust it outside.
Now the real problem is...do I put the quiet one 9000 to the left of my sump and run the drain line about 6 feet from the right of the sump to the left where the pump will be OR do I just leave the pump where it is and run the return line that extra 7 feet to the chiller?
I'm planning on the first scenario...and use 1 1/4" pvc from the sump which has a 1" bulkhead and then to the Q9000 what will be using a really jigged up connector...1.5" to 1" and then back to 1 1/4".
Decisions..decisions...
Oh yeah..I have a few other pickups that came in friday..didn't get a chance to take pics and post it.
original post with photos http://www.monsterfishkeepers.com/forums/showthread.php?t=89607
Yeah..its a 240G Long 96x24x24 from Tenecor...when it arrived..I thought to myself..oh shlt...how am I going to get it in to my rec room.
Still working on it. Just cracked my UV glass tube that goes into my chiller. I had to move the chiller out from under the cabinet to make room for my OC 319 and DIY FBF.
Now my dilemma is..I need to move the chiller to the left of the 240..in between the 125 and 240 which gives more than enuff clearance for the ventilation requirement for the chiller. Besides my window is right there, if I need to I can run a air vent duct to exhaust it outside.
Now the real problem is...do I put the quiet one 9000 to the left of my sump and run the drain line about 6 feet from the right of the sump to the left where the pump will be OR do I just leave the pump where it is and run the return line that extra 7 feet to the chiller?
I'm planning on the first scenario...and use 1 1/4" pvc from the sump which has a 1" bulkhead and then to the Q9000 what will be using a really jigged up connector...1.5" to 1" and then back to 1 1/4".
Decisions..decisions...
Oh yeah..I have a few other pickups that came in friday..didn't get a chance to take pics and post it.
original post with photos http://www.monsterfishkeepers.com/forums/showthread.php?t=89607
