Got the biocube stand today, spent 2 hours and to find out that they sent me two left side panel doors at the very end.
and directions didn't correspond to the holes given for the bottom, directions had 5 holes on each side, the actual bottom I had 6 holes on each side, so I figured out instead to put the peg in the side panel and match it to the hole, it worked.
as well as doorknob and strike plate was inverted on the directions, as screws was too little/big so figured out the strike plate and doorknob was the opposite unlike the direction that was the first warning though I should have stopped trying to get this pos together.
When I put on the left side door the edge wasn't even nice and pretty, the gap on the side when closed looked so retarded same goes for the natural curve as the edge of the door was poking out.
Most retarded production ever to come out of oceanic.
This is for the new ones, not the old one i believe there is new and old version of the biocube stand.
Anyone knows of anyone with that problem with the new stand assembly ?
