aqua clear 50 problem..

  • We are currently upgrading MFK. thanks! -neo

ROSS

Feeder Fish
MFK Member
Oct 15, 2005
1,177
2
0
47
connecticut
like most aqua clear filter's there are two chamber's of differant size's , well mine stay's full but seem's to lose suction and stop's flowing, the level of water drop's in side of filter some what.. . but the impellar is still spining and is submerged in water , if I fill it back up it run's normal :screwy: I know this sound's weird but it really happen's not all the time but enough to show concern..
not sure if this is dew to water level in tank , I keep it slightly low so my Managusese does'nt try jump (have lid but that still is in no way stoping him from tying). the tank in question is a 55gal long, some what old tank but has new inhabitance 7.5 '' managuense & an 9'' TSN aswell as a 4'' rapheal catfish. my filtration is made of two fluval 404's an aqua clear 50 (filter in question) and a aqua clear 30 power head ..
 
Do you have an exstension on your inlet tube?

Sometimes if the water level goes below or near where the two tubes fasten together, it can cause what you're describing.

It happens to my Emperor 400 and HOT Magnum filters. I have to be careful when I'm doing water changes and I leave the filters running.
 
MonsterFishKeepers.com