Aquarium from fishtankdirect?

  • We are currently upgrading MFK. thanks! -neo

Orthopod

Dovii
MFK Member
Feb 22, 2010
553
385
102
Seattle
I am considering a 96Lby48Wby24H.

Has anyone used them and any thoughts?

The acrylic will be 1/2 inch except for the top which will be 3/4 inch - is this sufficient?

Thanks.
 
I was considering them and a number of other folks. I did not pull the trigger as I decided to go smaller and glass. I have heard lots of good things about them. If you do some searching on the forum you will see the various posts.

I will say that I think they price their tanks cheaper by using thinner acrylic which you need to be careful about. When I was looking at a similar size tank I was told to stay away from 1/2in acrylic and the other manufacturers I was looking at all were using thicker acrylic. There are multiple calculators on the internet and this forum that will tell you what thickness you need.
 
V victor448 Jeff, didn't you get two same tanks from them?
 
V victor448 Jeff, didn't you get two same tanks from them?
I did get two tanks each 7.5 ft long 4 ft wide and 2 ft tall. All 3/4 inch except the bottom which is 1/2 inch. Very well built tanks. Best price I could find delivered for this size tank. IMHO this is the minimum thickness this tank should be built with. Otherwise higher likelihood of bowing and crazing.
 
  • Like
Reactions: thebiggerthebetter
MonsterFishKeepers.com