if someone could help me. I would like to paint the back of my 180 tank and i just can't seem to find any results. I have a glass tank and I would like to know what type of paint to use. Thanks
aquarium paint
- Thread starter Wyland
- Start date
Wyland;1907633; said:
I used regular black spray paint on the back of my 190g. It looks pretty good.
I've always used Krylon acrylic spray paint. Do thin coats and figure on going over it 3-4 times for a nice full covering. Take your time and don't rush and you won't get any drips or runs. The reason I use acrylic is that, while it's a little "softer" that enamel, it's very easy ro remove with hot vinegar and a razor blade if you ever want to change it out.
rallysman;1907945; said:enamel or latex will work fine. I've had better luck using flat black enamel. Just make sure to paint the outside
Latex scratches to easy then the scratches start to peel. Especially around where the lids open and close. I have used enamel, but still not satisfied. I am about to re-furbish another tank and am considering using an automotive paint For the outside. Inside for the plumbing and such, I'm stayin with Krylon enamel.
Alan Russell;1908761; said:
Most auto paint is enamel. It's more difficult to find lacquer now, but if you ask for it it's still available. One of the benefits of latex is that it's easily removable if you do want to change (of course this means it scratches easier as well).
I was gonna say that too. If you are really worried use epoxy for potable water tanks. You can have it tinted just about any color you want.terd ferguson;1908784; said: