Aquatistists,
7'x17"x34"tall in-wall build is underway. Reinforced concrete walls/base with angle-iron to hold & brace the glass, including tie-backs from the top brace to the back wall.
Q: Please suggest a material to seal the concrete & the steel, including a stuff that will adhere/set/seal the silicone around the glass interfaces.
a* I've got a gallon of WestMarine boat epoxy on-hand - good?
b* Benjamin Moore's pool-epoxy has been suggested (via Facebook) and there's a local dealer; however, i'm not seeing such a product on-line.
c* What else, preferably from a "common" company that might already be importing to Jamaica. Something for potable water tanks, for example.
d* Concrete/cement is to be steel-float, thus smooth. Do these products need a roughened surface?
Thanks in advance,
DrDroid.
7'x17"x34"tall in-wall build is underway. Reinforced concrete walls/base with angle-iron to hold & brace the glass, including tie-backs from the top brace to the back wall.
Q: Please suggest a material to seal the concrete & the steel, including a stuff that will adhere/set/seal the silicone around the glass interfaces.
a* I've got a gallon of WestMarine boat epoxy on-hand - good?
b* Benjamin Moore's pool-epoxy has been suggested (via Facebook) and there's a local dealer; however, i'm not seeing such a product on-line.
c* What else, preferably from a "common" company that might already be importing to Jamaica. Something for potable water tanks, for example.
d* Concrete/cement is to be steel-float, thus smooth. Do these products need a roughened surface?
Thanks in advance,
DrDroid.