BJB solderless LED star connector compatibility

[knnrd]

Hello,
I'm working on a DIY led build. I decided to solder the LED stars myself but up to now I'm really strugling with it and I don't know if I can complete this build or not.
Now I'm considering using these solderless connectors because that would make things really easy. It's just that I don't know if they will fit (without major modification). If I just have to make the center hole a big better, then that's no problem at all.

I'm using the cheap china LEDs: http://www.ebay.com/itm/32147155919...49&var=510363801310&ssPageName=STRK:MEBIDX:IT
and want to use these connectors: https://www.google.be/search?q=bjb+...hMI6dmats3hxgIVCVsUCh3LmwyZ&biw=1920&bih=955#

Will it fit or not? Again, if I have to mod the connector a litle bit, that's no problem

 

[PhysicsDude]

Hello,
I'm working on a DIY led build. I decided to solder the LED stars myself but up to now I'm really strugling with it and I don't know if I can complete this build or not.
Now I'm considering using these solderless connectors because that would make things really easy. It's just that I don't know if they will fit (without major modification). If I just have to make the center hole a big better, then that's no problem at all.

I'm using the cheap china LEDs: http://www.ebay.com/itm/32147155919...49&var=510363801310&ssPageName=STRK:MEBIDX:IT
and want to use these connectors: https://www.google.be/search?q=bjb+...hMI6dmats3hxgIVCVsUCh3LmwyZ&biw=1920&bih=955#

Will it fit or not? Again, if I have to mod the connector a litle bit, that's no problem

They should work. Most "Star LEDs" are standard size and layout.

I had the same experience as you.... First DIY LED setup I made I soldered all the LEDs.... And yeah those are a pain to solder, and even harder if you were dumb enough to mount them to the heat sink before soldering them like I did....

Next build I spent the extra 65 cents or so per LED to have the wire terminals.

 

[knnrd]

They should work. Most "Star LEDs" are standard size and layout.

I had the same experience as you.... First DIY LED setup I made I soldered all the LEDs.... And yeah those are a pain to solder, and even harder if you were dumb enough to mount them to the heat sink before soldering them like I did....

Next build I spent the extra 65 cents or so per LED to have the wire terminals.

Ok so the only possible problem would be that the center hole could be too small. That's easily enough fixed.

Where would be the best (cheapest) place to get them? I live in Europe so they have to come oversea.

 

[knnrd]

Anyone else that did try this themself before maybe?