I have a 75 gal. tank i am trying to find out what would be the best gph's for the sump pump? I also need to know how to determine the size of the drain hole and hose sizes from the tank to the W/D Filter? If someone can help me out it would be greatly appreciated.
Building a w/d filter
- Thread starter MoneyMan1187
- Start date
Will it be your only filter? Sw/fw? I agree 700-1000gph from the info we have (not much).
Does your tank already have a drain/overflow? If so, that's the size you've got to use and may limit how big of a pump you use. The hoses need to be the same size as the bulkheads for the drains.. If you're making pvc durso pipes then two 3/4" should do.
Does your tank already have a drain/overflow? If so, that's the size you've got to use and may limit how big of a pump you use. The hoses need to be the same size as the bulkheads for the drains.. If you're making pvc durso pipes then two 3/4" should do.
Danh;1105222; said:
Also need to know the bio-load.
If your tanks not drilled or you need more flow you can use one of these too:
http://www.monsterfishkeepers.com/forums/showthread.php?t=15733
Dr Joe
.
http://www.monsterfishkeepers.com/forums/showthread.php?t=89186
I am experiencing some kind of weird deja 'vu
This is the third thread asking for the same information.
Anyway, 225gph to 750gph is the answer.
I am experiencing some kind of weird deja 'vu
This is the third thread asking for the same information.Anyway, 225gph to 750gph is the answer.