The intake line on my magnum canister filter is starting to look really retched, and I was wondering how you clean a piece of tubing that long, or if most of you just replace it from time to time, or don't even worry about it. My main reasons for wanting to do so is 1. so I don't have to worry about flow restriction, and 2. don't ahve to worry about bad bacteria starting up...
Canister Tubing
- Thread starter rhinod56
- Start date
I took some weed whacker line and looped the end to the brush line. Then just cut to the length you need.
You're kidding me, right? You have 36" hoses and the brush is 22" long. So, you use the brush at both ends to give you 44" of cleaning distance.
the brush is the one that comes with the magnum right??? if it is oddball they come on a very flimsy piece of plastic string
Howdy,
I use electric wire (in your case use 7ft), and thread an old piece of cloth thru one end. Take the two ends of the wire, push them thru the hose til they come out on the other end, and then pull the cloth thru.
HarleyK
I use electric wire (in your case use 7ft), and thread an old piece of cloth thru one end. Take the two ends of the wire, push them thru the hose til they come out on the other end, and then pull the cloth thru.
HarleyK
F
FishHeadSoup
Guest
