Chip in corner of 125

[cornbread_5]

I have a 125 that has a decent size chip of glass missing out of one of the corners. The tank holds water and everything but my question is can the chip be repaired at all without having to replace both panels of glass

 

[SandNukka15]

I have a 125 that has a decent size chip of glass missing out of one of the corners. The tank holds water and everything but my question is can the chip be repaired at all without having to replace both panels of glass

Can u post a few pictures

 

[flukekiller]

Need some pics to really tell if it is safe or not. you can always repair a chip but that would only be for cosmetics not for strength

 

[cornbread_5]

Can't really get any good pictures

 

[pops]

as stated a pic really help, I have 2 tanks, 95g and a 145 that what you might say are good size chips, but they are still in place so more like cracked chips. if its deep and fallen out, this more of a issue than chipped/crack and still in place.

but again a pic really help.

 

[DN328]

Those look cosmetic. I dont think fixing will help structurally. But based on the picture I should be fine in my opinion.

 

[Binge]

I have a 75g somone tried to drill and stopped half way thru So I filled the hole with silicone in case there were any micro cracks been running for 8+ years now that way.

So I say fill it with silicone if it would make ya feel better