many of you may remember my old indoor pond, went through a divorce sadly that pond is no more. i am currently in the planning and pricing stage of my new pond. this time i am going with concrete block walls rather than 2x4 framed walls. gonna use 8x8x16" blocks main body of pond will be 10'x6' with an overflow on one end by using 1 8x4x16 block instead of an 8x8 that goes into a 6x2 trough filter with a few differant plants growning with grow lights above them. there will be polystyrene between the block wall and the pond liner and on the floor to help with insulation and to protect the liner from being torn. i am probably going to use 40mil rubber roofing material for the liner. i will be moderatly decorating the main body of the pond due to the monsters that will inhabit its tendency to destroy things. current stock list that will be going in- 2 pacu 16", 2 oscars 14" 10", red devil 8", silver arowana 16", rtc x tsn 16", 4 line pim 11", rtc 4", clown knife 15", various sized common plecos largest 16". i will post more info and pics as the build gets underway.
