Anyone ever done this? I'm working with two 50g breeders that are only 13" tall so if I keep the tube in the normal location it is only around 2-3" above my sand. Just to test I added an elbow on one of my tanks and now the inlet is about 8" or so above the sand. I like this a lot better.
Now I'm thinking about stretching the inlet tube about 2/3 of the length of the tank and having 2 strainers. One on the end and one about half way down the tube. Will the AC110 have enough power to pull from both strainers?
I know I could just add another filter, I currently have two filters on each tank and it's a little overkill and loud. If I can use just one AC110 and still have it pull from across the tank it would be ideal.
Now I'm thinking about stretching the inlet tube about 2/3 of the length of the tank and having 2 strainers. One on the end and one about half way down the tube. Will the AC110 have enough power to pull from both strainers?
I know I could just add another filter, I currently have two filters on each tank and it's a little overkill and loud. If I can use just one AC110 and still have it pull from across the tank it would be ideal.
