Not sure if I have any pictures of it but I built a stand to hang a shop light over my 72 bow front out of conduit
Im looking for lights for my tank Im about to put into service. My tank is 127 x 30 x 32. Are you satisfied with these lights? what if anything would you do differently?I used closet shelf brackets & rod that I got from my local Menards. Had to hang 4 lights over a 10 foot span, so needed more brackets and rods then you are going to need. Should cost you less than $20....
View attachment 1431771
View attachment 1431772
Mounted the shelf brackets on the back wall (at ceiling level for mine). Used screws into the studs and toggle bolts into the drywall at 2 foot intervals. Place the rod in the rod holders and hung the lights by their included wires. The closet rod can be cut to length with a pipe cutter.
View attachment 1431773
View attachment 1431774View attachment 1431775
Have since dressed the cords with zip ties and stick on zip tie holders.
Im looking for lights for my tank Im about to put into service. My tank is 127 x 30 x 32. Are you satisfied with these lights? what if anything would you do differently?