Diy Overflow pipe air/bubble fix very quiet

[Gualathar]

hey guys

i am new here and i whas reading alot about the diy overflow pipe ( i needed one my self )
The problem i got whas that the drop from my inlet whas to high this way making bubbles thats could enter my siphon part U turn

i dint really find any post to how to fix it so thats why i made this one

i have a pic to explain dint have alot of time and photoshop so oldschool paint !

Mario

 

[boldtogether]

Now your overflow wont skim the surface.

 

[Gualathar]

its the same overflow only the outlet to the sump is just a bit higher i got it working now and its skimming good
i also made a siphon from the check valve where you start the pvc siphon whith this way IF any bubbles comes in it gets sucket to the sump aswell
and if the pump stops it will suck a bit of the water out of the pvc siphon and then stop whithout breaking it so that when you start the pump again it still works

sorry for my english

mario

 

[Gualathar]

i dont know how i can edit my post...

i wanted to say the most right tube is the part in the aquarium
i just raised the siphon effect making it quiet and less bubbles that can break the siphon