Double stacked stand

[lukenewton]

Hello all. I am looking to build a stand to hold 2 3x2x1.5 tanks. Lower tank will still need to be raised roughly 18" off the ground then some clearance above it before a 2nd on top. Could people please send images and designs of stands they have made to stack tanks.
Thanks.

 

[fishguy1978]

55g double stack

Quad 29g rack

 

[fishguy1978]

Here is my 8 place 29g rack.

 

[fishguy1978]

Take all of your uprights and clamp them together so that the bottom ends are flush. This is super critical. Set your saw depth to 1.5in which is the thickness of a 2x piece of dimensional lumber. Cut notches the same size as your cross members. These should be a little tight.

 

[biguebs]

Here’s my double 125 stack. Also have a 125 over a 180.

 

[fishguy1978]

8x 29g rack
L= 55in, W= 30in, H= 48in.
Tank access for lower rack H= 10in.
I have access to all 4 sides.
Bottom rack is H= 12in
Top of upper tank is H= 72in

Double stack 55g
L= 53in, W= 16.5in, H= 48in.
Lower tank access H= 10in
Bottom rack is H= 10in
Top of upper tanks H= 67in

29g quad rack
L= 64in, W= 12in, H= 48in
Access to lower H= 7.5in
Bottom rack is H= 14.5in
Top of upper tanks H= 60in