DURSO STANPIPE HLP

[bgkingd340]

Can i pls get some help..wanted to know in my 300 that i am converting i want to put in a standpie in the chamber but the chamber has no teeth at the top it only has 2 Bout 2 1/2 inch sloots on the side of chamber ....wanted to know if this would still work or do i need to plug them and cut teeth in the top ...PLs help have asked for help previosly and received none isnt that what is forum is all about helping each other !!!!!!!!!!!!! tHanks in advace

 

[vanilla__gorilla__]

well if you want a stand pipe I find it helps to have a drilled tank & it helps to have the openings at the top and not the sides like yours is so maybe you should take that ugly thing off and have your tank drilled or use a hang on back over flow

 

[Lil_Stinker]

Looks like you have some work. I would need to 'seal; the slots & work son the top for flow.

The drill may be best but you could put in a pump to vacate the standpipe from the bottom. this may cause some maintainance issues so be prepared.