My Eheim 2260 is putting out mass amount
of micro bubbles >.<
Need some input on this.
Thank you.
of micro bubbles >.<
Need some input on this.
Thank you.
Eheim 2260; micro bubbles >.<
- Thread starter onyx1
- Start date
Hm....
-Try turning the unit off and filling up that canister with water with a powerhead to ride all the air trapped in it.
-Check to see if your air disk/etc. is not near the intake of your 2260.
I have had mine 2260 for almost a year with no micro bubbles. See if those above would help.
-Try turning the unit off and filling up that canister with water with a powerhead to ride all the air trapped in it.
-Check to see if your air disk/etc. is not near the intake of your 2260.
I have had mine 2260 for almost a year with no micro bubbles. See if those above would help.
If you are sure you don't have air going into your intake, then it is time for a new sealing ring. Yours must be worn and not sealing properly. That would be the only other possible place where air could enter the filter.