Im seroiusly thinking of building a 2000g indoor pond (8x8x4) for a RTC, a TSN and maybe an arrowana and a few cichlids if they dont get eaten. Im going to need a little help with the filtration.
i was thinking of using a 100 or 200g rubbermaid for a sump and 2 900 FBFs. water would overflow through 2-3 pipes through micron socks and into the sump, the water would flow through horizontal filter pads and be drained through the bottom of the rubbermaid, through the pump and up about 8 foot and fall through a 4' tall 1'X1' box of bio balls and back into the pond. need oppinions on GPH.
the 2 900 FBF would be run on their own
---------------------
unput requested.
i was thinking of using a 100 or 200g rubbermaid for a sump and 2 900 FBFs. water would overflow through 2-3 pipes through micron socks and into the sump, the water would flow through horizontal filter pads and be drained through the bottom of the rubbermaid, through the pump and up about 8 foot and fall through a 4' tall 1'X1' box of bio balls and back into the pond. need oppinions on GPH.
the 2 900 FBF would be run on their own
---------------------
unput requested.
