Filtration quiz

  • We are currently upgrading MFK. thanks! -neo
Assuming a 6' 210, I would find a 6' 120 and use it as a sump. Filter socks, into some finer pads, then into a load of MarinePure, finally through a polishing pad, before reaching the pump and heaters. In 1 of the chambers I would also run a 36W UV filter/powerhead as to make sure that water is SUPER CRISPY! I am looking at doing these modifications currently, just not a 120 sump.
 
I would use 210 gallon sump. Full of algea balls in a fluidised reactor powered with 600 watts of mixed led, 660nm and 435 nm.

Or I would run a 2" pipe line to some rocky mountain head water stream.
 
Fluval FX6 and be done.
 
MonsterFishKeepers.com