fixing the cube

  • We are currently upgrading MFK. thanks! -neo
B

billbobthegreat

Feeder Fish
MFK Member
May 20, 2008
367
0
0
Eastbourne uk
Ok so I have a 36"x36"x30" cube (large footprint) one of the side panels is cracked and I'm having difficulty getting hold of the glass has anyone got any suggestions on how to fix it without replacing? Its cracked from top to bottom but the tank is very well braced its almost unmovable thanks
 
I've waterproofed a 3/4" plywood piece and siliconed it into place.
 
I did not remove the broken panel i siliconed all over the cracked panel and placed the new piece on top/inside of the broken one. I let it set for a few days then laid down the interior silicone seam.
 
I did not remove the broken panel i siliconed all over the cracked panel and placed the new piece on top/inside of the broken one. I let it set for a few days then laid down the interior silicone seam..
 
I wouldn't do it half ass, buy a new sheet of glass and replace it. If you just silicone a sheet of plywood to it you can't tell me it's gunna hold up for years on end like if u did it the right way


Sent from my iPad using MonsterAquariaNetwork app
 
You must log in or register to reply here.
MonsterFishKeepers.com
Top Bottom