FX5 output, intake holder parts

[solchitlins]

So I bought a used FX5 described as 6 months old, complete with no problems for $100 off a saltwater reefing forum.


Got it today and it's missing the following parts:

• Rim connectors (2)
• Rim Connector clips (6)
• Small Suction cups (4)
• Out put assembly (1)

So, I'm wondering if any of you diy guys have these that your not using and if I could buy them off you.

I'm also wanting one coarse circle pad to use as a prefilter before my bio media.

thanks
Greg

gregoryyeokum@hotmail.com

 

[ozz465]

try homedepot man , prob can find everything u need there .

 

[solchitlins]

bump it up, one more try before I go diy route

 

[solchitlins]

bump it up, one more try before I go diy route

 

[solchitlins]

ok how about a 1 inch return J shaped tube?
any one know where I can find one of those?
Like this but takes 1 inch tube??

 

[solchitlins]

bump it up, one more try before I go diy route

 

[jmotion]

http://www.fluvalparts.com/servlet/Categories?category=Filter+Parts:Fluval+FX5+Parts

 

[solchitlins]

It will cost $52.30 from the fulval parts place so no I can't do that.
But thanks.

how about a 1 inch return J shaped tube?
any one know where I can find one of those?
Like this but takes 1 inch tube??

My total budget for intake and return is under $20