Is there anyway to fit a 8 foot by 2 foot pond in through a 80 inch by 3 foot dorway I was thinking about taking a ratchet strap to an opposite side and bending it down. The pond is made from polypropeline and is moderately flexible thanks.
Getting a 600 gallon stock tank through a standard door
- Thread starter reefraymaster
- Start date
ya ur best way is prbly bending it and angling it but idk if it will fit even with both those because you need to fit in 16" some how
Get a running start. 
Or go thru a window (a large window).
If you do the ratchet strap thing leave it in the sun for a while (not this week) to heat it up a little and make it more pliable.
Dr Joe
.
Or go thru a window (a large window).
If you do the ratchet strap thing leave it in the sun for a while (not this week) to heat it up a little and make it more pliable.
Dr Joe
.
idk how to help ya but all i ask is that when this is attenmpted PLZ let me say that again PLZ have a video camera or a digital ready i think it would not only be interesting to see how you do it but if there is video then im sure there will be some currsing lol i know i would
before you go bending anything, how tall are your celings? if they are 8' or more, just turn the tank on its end while supporting it. as your walking in the door, start to raise the side of the tank thats inside and you should be in and around the corner in under 5-10 min.
you would have to remove the header above the door wich will be load bearing and not a good idea.... that alot of bending 16" imo but might work...